Browse all practice questions for the ABYC Composites Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ABYC Composites Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which substance is used to thin gel-coat?
  • What should be monitored to prevent excessive porosity in resin application?
  • What is the primary reason that thermosets cannot be re-melted?
  • How is chopped strand mat usually measured?
  • Which quality is enhanced due to the structured nature of woven roving?
  • What is a common material used for core construction?
  • Which of the following is NOT an advantage of composites?
  • Which color code signifies instability in hazardous materials?
  • How do air voids in the laminate affect pre assembly?
  • What could you do to remedy the pre-release of a deck?
  • Why is fabric overlapped in a laminate?
  • What is the primary purpose of sizing in composite materials?
  • What causes gel coat to cure too quickly, resulting in stress cracks?
  • What is cab-o-sil primarily made of?
  • Which parts are typically categorized as "small parts" in composite construction?
  • What does MSDS stand for?
  • Why is the skin coat critical in lamination?
  • Which factor influences the quality of the laminate finish?
  • What does a red label on a gel coat drum indicate?
  • Which compound is an essential ingredient in Vinyl Ester?
  • What advantage do solid laminates have over sandwich-constructed laminates?
  • What characterizes VARTM (Vacuum-Assisted Resin Transfer Molding)?
  • What effect will defects in the mold surface have on the part?
  • What application methods are suitable for applying skin coats?
  • How does using mat affect the print-thru on the surface of a composite?
  • What is the typical shelf life of polyester resins?
  • What advantage does vinyl ester resin provide in terms of environmental durability?
  • What should you never rinse your gel coat down with?
  • What characteristic is important when considering the material for a stringer?
  • What is a knitted reinforcement?
  • What is a significant advantage of sandwich construction in composite materials?
  • What is the purpose of mold release agents?
  • What are the advantages of robotically applied gel coat?
  • What role does a proper lamination schedule play in building composite structures?
  • What is the correct initiation rate for polyester resin at 75 degrees F?
  • Woven composite reinforcements generally fall into what two categories?
  • What is a flow coater primarily used for in the context of composite applications?
  • Which step is critical to the installation of a stringer?
  • What procedure needs to be followed when handling a large gel coat spill?
  • What is the advantage of a radius fillet at the base of a stringer?
  • What is a consequence of "triggering" during the application process?
  • What type of resin can be re-formed after curing?
  • What causes improper chop patterns during application?
  • What determines the flow rate for applying gel coat?
  • What defines a composite material?
  • One reason for using mat in composite layups is to:
  • What problem can occur from using dull chopper blades?
  • What is one of the advantages of using polyester resin?
  • What is the initial step in setting up a spray gun for gel coat application?
  • What property do composites typically offer compared to traditional materials?
  • When is it appropriate to use an adhesive instead of putty?
  • What factor contributes to the effectiveness of a respirator?
  • What is the proper distance from the mold when spraying gel coat?
  • In terms of reinforcement choice, what is an advantage of using woven roving over other types of fabrics?
  • What issue can lead to alligatoring in gel coat?
  • Which factor is NOT a cause of pre-release?
  • Which type of resin is included in the three types of polymer matrix resin?
  • What phase of curing occurs immediately following gel-time?
  • What is the primary purpose of using a splash mold in repairs?
  • What should be checked before trimming a composite part?
  • Which option is NOT a characteristic of vinyl ester resins?
  • What may result from a gel coat layer that is too thick?
  • What drove the development of FRP boats?
  • What method did early FRP boat builders use for hull design?
  • What is a common application of woven roving beyond marine structures?
  • What type of resin cannot be re-formed once cured?
  • What is used to indicate the beginning of the curing process in resin?
  • When using woven roving, what benefit does the increased material in the warp direction provide?
  • What happens if a gel coat is applied too thinly?
  • What is the formula to calculate the percent of fiber content in laminate?
  • What is a significant advantage of utilizing controlled spraying techniques in gel coat application?
  • What is the typical scarf radius recommended for repairing single skin?
  • What is a necessary maintenance step for an internal mix gun?
  • Which type of resin is naturally fire retardant due to its incorporation of water in its chemical structure?
  • What are the functions of a transom in an outboard powered boat?
  • What surface finish is required for a mold plug to ensure quality reproduction?
  • What properties do isothalic resins typically have compared to orthothalic resins?
  • What is the role of bedding resin in laminated composite construction?
  • What is a common application mistake when using a chopper gun?
  • Which property is critical for gel coat to perform its function effectively?
  • What weight is most commonly used for woven roving in marine applications?
  • Which factor is crucial when applying urethane foam?
  • What is a key advantage of the closed molding process?
  • What type of resin is gel coat?
  • What is a potential result of a poorly fitted thru-hull?
  • What is a characteristic of thermoset resins?
  • Which feature is essential for effective load distribution in hull construction?
  • Prior to bulk laminate application, what should be checked regarding skin coat?
  • What is one of the primary advantages of pre-cutting reinforcement fabric?
  • What must be ensured when using a hoist for moving heavy objects?
  • In laminate applications, which cures faster?
  • How can the unique characteristics of aramids best be exploited?
  • Which tool is valid for applying resin to a surface?
  • What safety measure is important when grinding composites?
  • What happens if the resin is not properly mixed before application?
  • Which of the following is an advantage of composites over traditional materials?
  • What is the function of a nozzle in flow coating?
  • Which of the following is a function of gel-coat?
  • What maintenance is required for an RTM mold?
  • The Thixotropic index refers to which of the following characteristics of resin?
  • What is the preferred method for demolding a composite part?
  • Which factor most influenced the popularity of fiberglass boats in the 1960s?
  • What is the main limitation of working with thermoset resins after they are cured?
  • What type of resin is typically known for its ability to undergo thermal curing?
  • What is the usual catalyst ratio for curing resins?
  • Which of the following is an ingredient of polyester resin?
  • What are the common names for resin and mat in composite materials?
  • What material is commonly used as a core for transoms?
  • How do you calculate the fiber-to-resin ratio of a laminate?
  • The level of emissions from an open mold primarily depends on which factor?
  • What safety equipment should be used when working with gel coat?
  • Production molds for boats are typically made out of which material?
  • For what purpose is a split mold typically utilized in composite manufacturing?
  • In composite maintenance, which aspect is critical when assessing potential failures?
  • How much MEKP is needed to initiate a cup of resin at 1% concentration?
  • What is a primary cause of excessive porosity in a laminate?
  • Health-related color code for hazardous materials is represented by which color?
  • What is the correct procedure for mounting a thru-hull fitting?
  • Which acid is NOT an ingredient of polyester resin?
  • Where is cab-o-sil typically used?
  • How does the weight of woven roving influence its production process?
  • How many employees are recommended when moving heavy objects with a hoist?
  • How does the design of woven roving affect its application in marine structures?
  • What needs to be done prior to overlaying core material with reinforcement?
  • How often should gel coat on the shop floor be mixed?
  • Which type of spray gun utilizes a siphon mechanism for applying resin?
  • What is an example of an aramid fiber?
  • What is an expected outcome of closed molding compared to traditional methods?
  • What does the core of a sandwich construction provide to a composite structure?
  • To consolidate a laminate, what process is essential?
  • How is fiberglass weight by area typically expressed?
  • What is Formica commonly used for in single skin repairs?
  • What is the function of "kerfs" in core materials?
  • What is a bracing plate?
  • What is the recommended personal protective equipment (PPE) for trimming and grinding?
  • What should you do if you notice excessive wet chop during application?
  • What is one of the main reasons for utilizing fillers when working with composites?
  • What is the function of an inhibitor in resins?
  • How can one ensure a fully developed fan pattern when spraying gel coat?
  • In composite materials, what role does a binder play?
  • What is a potential cause for gel coat crazing or cracking?
  • What type of material is typically used in the manufacture of woven roving?
  • What can occur from applying too many plies at once in a laminate?
  • Which method can be applied to assess and verify gel-coat performance?
  • What could be a consequence of utilizing low-quality fillers in composite production?
  • What is one of the main roles of bulkheads in boating construction?
  • What factor is critical when ensuring core contact in sandwich construction during fitting?
  • What was a significant effect of the proliferation of fiberglass boat building in the 1960s?
  • What type of resin is most commonly used for marine applications?
  • Spray-up or chopper gun construction using "gun roving" is most popular in what?
  • What is the primary method for controlling the viscosity of resin?
  • What is the first step in calibrating a chopper gun?
  • In the context of bonding, what is "primary bonding" characterized by?
  • How does gel coat differ from standard polyester resin?
  • What problems can result from a cored deck with defective core bedding?
  • Which of the following is NOT a type of polymer matrix resin?
  • In the context of composites, how is a "mold" best defined?
  • What initiated the use of modern composite materials?
  • Which method is most commonly used for trimming a composite part?
  • What materials are often used for deck stiffeners?
  • What role does controlling the air pressure in a chopper gun have?
  • What is the recommended final thickness of gel coat after curing?
  • Effects from an off-ratio burst can be prevented by what?
  • How does controlled spraying practice enhance part quality?
  • What is the best way to clean a waxed mold?
  • What is one benefit of using skin coats in lamination?
  • Who controls environmental regulations for boat builders?
  • How is Woven Roving typically measured?
  • When did fiberglass boat building begin?
  • What is a potential outcome of using too much catalyst in gel coat?
  • Which of the following is NOT a kind of open molding?
  • What is the primary weaving pattern of woven roving?
  • Which type of spray gun is considered the most environmentally harmful?
  • How can a change in the lamination schedule affect a composite part?
  • Which of the following functions does gel coat NOT provide?
  • What is the proper wet-gage thickness of gel coat?
  • What needs to be done prior to applying gel coat?
  • Why can thermoplastics be reformed while thermosets cannot?
  • What type of failures can occur during cored installation?
  • What does FRP stand for?
  • What is a primary benefit of incorporating mat into the layers of composite structures?
  • What should be done if a laminate is affected by drainage?
  • How much MEKP is typically required to initiate a quart of resin at 2%?
  • What does woven roving typically consist of?
  • What should you look for when performing a visual mold inspection?
  • What is a characteristic of thermoplastic resins compared to thermoset resins?
  • What is the purpose of hull stiffeners?
  • What is a key feature that ensures a mold can release its product effectively?
  • What should be done to the surface of the core material before applying laminate?
  • What is one key driving factor in the development of FRP boats?
  • For what purpose are putties commonly used in composite construction?
  • How do isothalic resins differ from orthothalic resins?
  • What is the most commonly used process for laminating in the boat building industry?
  • How is gel coat typically applied in the composite manufacturing process?
  • What material is commonly used for stringers and bulkheads?
  • Why is woven roving preferred for large marine structures?
  • What does the polymerization process involve for resins?
  • What ingredient is used to hold chopped strand mat together?
  • What are the alternate names for workable resin time?
  • Which type of resins is known for having the best secondary bonding characteristics?
  • What occurs during polymerization?
  • What is the main purpose of using a skin coat in a composite laminate?
  • What should be considered during the final inspection of parts?
  • Which closed molding procedure is characterized by vacuum pressure only?
  • When is the appropriate time to demold a part?
  • Hat-stiffened construction is most commonly used in which type of applications?
  • What potential disadvantage is associated with using woven roving?
  • The gel coat surface of a mold should be protected from what while it is in storage?
  • What is a common method to improve the strength of a hull panel?
  • What are the consequences of improper thru-hull installation?
  • Which type of resin is typically less expensive but less durable?
  • What is another common name for "boat cloth" used in composite manufacturing?
  • What is the primary purpose of the framing system around a mold?
  • What type of chemical reduces the cross-linking rate of resin to increase working time?
  • What is the final thickness of gel coat after curing?
  • What can be a consequence of improper installation of a transom?
  • What is a significant characteristic of woven roving that enhances its performance?
  • What is a characteristic feature of thermoset resins?
  • When creating a deck-to-hull overlap, what factor must be considered?
  • What pattern should you follow when spraying the gel coat?
  • What unsaturated acid is commonly found in Vinyl Ester?
  • How often should a mold be inspected?
  • When should release agents be applied?
  • What are the two major categories of resins used in composites?
  • Describe the woven reinforcement "cloth".
  • In the context of composites, what does impingement refer to?
  • What is one of the types of release agents?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy